Electric Actuated Ball Valve

What are Ball Valves?

Ball valve is a quarter-turn valve used in industries to control fluid flow. Ball valves have a hollow, perforated, and pivoting ball with a hole (bore) in the middle.

Components of Ball Valves

  1. Body: The body of a ball valve usually made of metal, such as brass, stainless steel or cast iron It provides the structure and support for the other components.

  2. Ball: The ball is the central component of the valve. It has a hole (port) through which the fluid flows. Rotating the ball controls flow or shuts it off.

  3. Port: The port refers to the hole in the ball. Ball valves can have different port configurations, such as full port (large bore), reduced port (smaller bore), or multi-port (multiple ports for complex flow control).

  4. Stem: The stem is a rod that connects the handle or actuator to the ball. Rotating the handle or actuator causes the stem to turn, which, in turn, rotates the ball.

  5. Seats: Seats are the sealing surfaces located at the entry and exit points of the ball. Seals valves tightly, preventing leakage.

  6. Seals and O-rings: Seals and O-rings provide additional sealing between the ball, stem, and body to prevent leakage.

  7. Handle or Actuator: Ball valves can be operated manually or automatically. Manual ball valves have a lever or handwheel, while automated valves use electric, pneumatic, or hydraulic actuators for remote control.

Types of Ball Valves

1. Electric Ball Valves

Electric ball valves, also motorized valves, are automated control ball valves with an electric actuator. Remote control of electric ball valve using electrical signal, eliminating manual handling and maintenance.

Here are some key features and advantages of electric ball valves:
  1. Electric Actuator: Electric ball valves have an electric actuator with motor and gearbox. The actuator receives electrical signals to open, close, or modulate the valve.
  2. Remote Control: Electric ball valves allow for remote control and automation. Integrate into control systems, PLCs, or central control room for monitoring and control.
  3. Position Feedback: Electric ball valves often provide position feedback, allowing operators to know the exact position of the valve (open, closed, or partially open). Feedback aids system diagnostics and control strategies implementation.
  4. Modulating Capability: Electric ball valves offer precise control over flow rate modulation, unlike manual valves that are either fully open or closed.
  5. Fast Operation: Electric ball valves offer rapid opening and closing times, allowing for quick response in automated systems. This is especially beneficial in critical processes where immediate valve action is necessary.
  6. Integration with Control Systems: Electric ball valves enable seamless integration into control systems.
  7. Energy Efficiency: Electric ball valves consume power only when actively opening or closing, making them energy-efficient compared to continuously operated valves such as control valves with pneumatic actuators.
  8. Reliable Operation: Electric ball valves are renowned for reliability and long service life. They are less prone to wear and tear compared to manually operated valves, as the electric actuator ensures consistent and precise operation.
Manual Ball Valves for versatile uses.

2. Manual Ball Valves

Manual ball valves, operated manually with handles or levers, are widely used in industries for fluid flow control.

Here are some key features and information about manual ball valves:
  1. Handle or Lever: Manual ball valves have a handle attached to the stem. Rotating the handle or lever by a quarter-turn (90 degrees) opens or closes the valve.

  2. Quick and Easy Operation: Manual ball valves offer quick, easy operation. They require a simple quarter-turn action to open or close the valve, allowing for fast response and control.

  3. Versatile Applications: Manual ball valves serve various applications in industries, water, and plumbing. They can handle various fluids, including liquids, gases, and slurries.

  4. Full Port and Reduced Port: Manual ball valves are available in two main configurations: full port and reduced port. Full port valves have larger ball bores for increased flow capacity. Reduced port valves have smaller bores, restricting flow but suitable for low flow capacity applications.

  5. 2-Way and Multi-Port Options: Manual ball valves have 2-way configurations with single inlet/outlet. However, multi-port manual ball valves with three or more ports are also available. Valves enable complex flow control patterns, allowing multiple outlets and streams.

  6. Sealing Mechanism: Manual ball valves use PTFE seats for tight seals and leak prevention. The sealing mechanism ensures reliable shutoff and minimizes the risk of fluid leakage.

  7. Durability and Pressure Ratings: Manual ball valves withstand high pressures and temperatures. Material options include brass, stainless steel, cast iron, and plastics.

  8. Visual Position Indicator: Many manual ball valves feature a visual position indicator on the handle or lever. Indicator displays valve position, allowing easy verification of status.

Pneumatic Ball Valve for all applications.

3. Pneumatic Ball Valves

Pneumatic ball valves utilize compressed air or gas for automated, remote control of fluid flow in industrial applications, ensuring efficient and reliable operation. They offer several advantages over manual valves, including faster operation, precise control, and the ability to integrate into larger control systems.

Here are some key features and information about pneumatic ball valves:
  1. Pneumatic Actuator: Pneumatic ball valves use a pneumatic actuator to convert compressed air or gas energy into mechanical motion.

  2. Automatic Operation: Pneumatic ball valves provide automatic operation, eliminating the need for manual intervention. Remote control and integration enable seamless automation.

  3. Fast Response: Pneumatic ball valves offer fast response times, allowing for quick opening and closing of the valve. Rapid flow rate changes or immediate shutoff are crucial.

  4. Precise Control: Pneumatic ball valves enable precise control of fluid flow. Modulated actuator ensures precise valve opening/closing for accurate flow regulation.

  5. Position Feedback: Many pneumatic ball valves provide position feedback through mechanical or electrical position indicators. This feedback allows for monitoring the position of the valve remotely and integrating it into control systems for process optimization.

  6. Air Supply Requirements: Pneumatic ball valves require a supply of compressed air or gas to operate the actuator. The air supply should be clean, dry, and at the appropriate pressure to ensure reliable operation of the valve.

  7. Integration with Control Systems: Pneumatic ball valves integrate seamlessly into DCS and PLCs, enabling comprehensive process control through interconnected valves, sensors, and instruments.

  8. Durability and Pressure Ratings: Pneumatic ball valves withstand high pressures and harsh conditions. They are available in various materials of construction, such as stainless steel or brass, to suit different applications and fluids.