Joventa DMD – Modulating Electric Actuator

Joventa DMD is low torque, modulating electric actuator with control signal operated quarter turn / 90 deg angle of rotation operation. It is equipped with manual release button for override function, and used in motorised dampers and valve in ventilation, MEP, air-conditioning.


Joventa DMD – Modulating with control signal input Electric actuator

Joventa DMD series is small size, low torque modulating electric actuator working on control signal input for proportional operation of dampers, valve etc, for quarter turn angle of rotation. It is used in AHU, ventilation, chillers, MEP for control operation of dampers and valves.

It is compact, low noise, rugged performance for low torque requirements. Joventa DMD is also equipped with manual release button, for override function, along with universal adaptor to suit many shaft sizes.

Product Nomenclature / Specifications
DMD1.2Modulating Damper actuator
Xblank = with 1.2 m PVC cable; C = with plug-in terminal block connection


Actuator ModelDMD1.2DMD1.2C
Torque4 Nm
Connection1.2 m PVC Cableterminal block plug-in
Run time72 sec
Supply24V AC, 50-60Hz
Power Consumption3.6 VA
Control SignalDC 0(2)…10V or 0(4)..20mA, with field furnished resistor 500 ohm
Angle of Rotation90° (93° mech.)
Ingress ProtectionIP 42IP 40
StandardsMechanics EN 60 529 / EN 60 730-2-14
Electronics EN 60 730-2-14
EMC Emissions EN 50 081-1:92 / IEC 61 000-6-3:96
EMC Immunity EN 50 082-2:95 / IEC 61 000-6-2:99

Additional information